Crafter/MAN Product Range
Crafter Cab Blind Set
2017 onwards
Designed as a lightweight alternative to the exterior window covers. Especially useful for wild camping and bad weather!! these internal covers gives you the privacy you need without leaving the comfort of your van.
Primarily 3 season use, as with any internal blind you may still get some condensation but our main aim was to create an aesthetically pleasing interior with a functioning thermal blackout cover.
We use a 4oz waterproof nylon material with a combination of magnets, straps and fibreglass rods to create our cab set. The windscreen cover has fibreglass rods sewn into the material giving it strength and rigidity. We've also added tensioning straps which tie around the sun visors which help keep the cover in place.
The driver and passenger window covers are attached to the inner window frame using magnets. As seen in the photo the magnets are sewn into the edging where the black tabs are, each edge having plenty of contact points.
The cab set is sold with a waterproof nylon drawstring bag for £240 which incudes VAT and delivery to a UK mainland address.
Crafter/MAN Rear Door Blind 2017 onwards
Our rear door insulated blind for the Crafter/MAN 2017 onwards. We have designed the blind for the standard high roof version, we do have the ability to make a blind for the lower roof height.
Made from the same thermal 4oz material to match our cab set.
Bespoke made to the length that suits your van. The half blind shown in the photo has been fitted to our own camper with the blind finishing at the base of the bed.
The cover is made with 2 zips which enables the centre section to be rolled up when not in use. There are then 3 straps with buckles to secure the blind in place.
The outer framework of the blind is attached using velcro to the inner frame of your van as a permanent feature, metal or 4 way stretch carpet is the ideal base for the velcro to adhere to.
​
​
Having the blind finish at the base of your fixed bed enables easy access to the zips when inside your van.
The blind can also include a flynet as an extra, this will have it's own zips attached so can be kept in the down position with the thermal section rolled up.
The bespoke top section needs to be measured from the internal top bar to where you'd like the blind to finish. Anything up to 100cm drop is £220 which includes VAT and delivery.
The flynet option is an extra £50.
Like our conversions we pride ourselves on our attention to detail, so the products we make available to buy are made with the same care.
While developing the rear blind for the Westfalia Sven Hedin and VW Grand Cali the system of fitting can also be applied to all Crafter/MAN vehicles 2017 onwards.
Take a look at our YouTube channel showing how to fit and if you prefer that option we can discuss it when ordering.
This is the blind fitted to a Grand Cali, the fitment will be the same for Crafter/MAN vans. We designed it so the door catch area is incorporated into the design. There is a little more effort to fit but again we'll provide instructions.
All other aspects of this cover is the same as previously stated, with a zipped section that can be rolled up when not in use and a flyscreen is an optional extra.
Cost of the blind with the door seal fit depends on the drop required, cost from £220
Crafter/MAN Cab Bed 2017 onwards
Cab bed that fits a Crafter/MAN 2017 onwards
Designed in house to fit the Crafter/ MAN 2017 onwards, this cab bed is ideal for the occasional extra camper. Made from top quality 2.5" reflex foam sitting on top of 9mm birch with precision cut CNC holes to allow the mattress to breathe. It's then covered in scrim backed black car upholstery fabric. As with the Ducato there are straps which secure around the grab handles for extra stability. Made in 3 sections joined by stainless steel piano hinge which allows the bed to be folded for storage.
​
The cost including delivery is £385 to UK mainland address.
Collection available please contact for further details.
Crafter/MAN Handle Relocation Kit
​As a safety/useful feature, as in our Ducato/Boxer conversions, we move the rear door handle once the original becomes inaccessible when a fixed bed has been installed.
This allows the rear door to be opened easily from inside. The kit comes with a new handle as the original is unsuitable for the new position.
​
This photo shows the handle relocated to the top of the door, enabling you to use the door when inside. The kit is supplied with a new handle plus all you need to successfully re route the mechanism. We've designed and made new blocks and cables plus an aluminium plate. All hardware and blanking template is also provided. There is a YouTube video on our channel which takes you through the installation process.
​
The handle kit is £120 which includes delivery to UK mainland